SHS Steel 200 X 200 X 5 mm For Bridge Structure | Large Diameter | Medium Thickness

Advantage Of SHS Steel Sections Produced By Yuantai Derun,Such as:

When producing SHS Steel Section, Yuantai Derun adopts the world's advanced direct molding technology, and uses traceable raw materials purchased by large factories. The welding flux uses materials with high fusion with the base material, and the entire production process adopts electronic control operation, which maximizes the tightness, strength, and resistance to cracking of each weld on the square tube body, making your bridge structure project safer and more worry free.

Every SHS Steel Section purchaser must meet your requirements in terms of standards, steel grades, and performance when measuring Chinese SHS Steel Pipe suppliers. To this end, Yuan Taide Run has established a CNAS certified laboratory, which ensures that the chemical composition, yield strength, tensile strength, and impact testing of the SHS Steel Section meet the corresponding standard requirements for bridge structures.                                 Send Your Inquiry Now!

In order to facilitate more reassuring cooperation for buyers, we have launched a free sample policy. Normally, the length should be within 20 centimeters, and you only need to pay one shipping fee. Eliminating customers' concerns about quality and performance. Get free samples now!

1. Apply oil

2. Spray painting

3. Hot dip galvanizing

After the square hollow section is welded into shape, there will inevitably be some residual internal stress around the weld seam, which can be eliminated by heat treatment.

The R-angle of a square hollow section usually has a curvature. If the customer's special structure requires the curvature of the square tube to be turned into the right angle they want, or the right angle of the inner and outer walls, we can provide customers with four corner heating and flexibly customize the required R-angle.

Yuantai Derun can provide customers with some simple processing services for SHS Steel 200 X 200 X 5 mm, such as customized length cutting, punching, welding, bending, etc., to maximize customer satisfaction.